Current page: 16

16. Bottom view




<--Previous  Up  Next-->

16. Bottom view

You can see how the battery pack fits in the bottom of the base. The driver circuit is inside the base, on the other side of the battery pack. I carved the hole for the plug from the other side, so it's recessed a little. I drew pictures of a battery and a wall plug on the switch to explain how to switch it from one to the other. Ideally, I would have used a three way switch so you could turn it off without unplugging it or taking out its batteries. But I had already carved the hole for that switch, and didn't have another piece of pumice to use instead.